Lg Wh16ns40 Driver
Hello, I have received my LG WH16NS40 with SVC code: NS50 yesterday and it had FW 1.02 on it. I immediately flashed it to the latest FW 1.03 after trying some Blu-ray discs that worked fine.
However, without a valid licence some parts of the software will be locked. Elm327 driver. The links below allow you to download the full version of OBD Auto Doctor for free.
Lg Wh14ns40 Driver
1.02 firmware is excellent firmware and should never be updated in the WH16NS40, BH16NS40, basically any drive build in 2016, 2017 that has a service code of NS50 on the lower right hand corner of the sticker on the unit. The LG Electronics WH16NS40 16x Internal Super Multi Blue Blu-ray Disc Rewriter supports a wide variety of optical media. In addition to writing data to DVD and Blu-ray discs at a speed of 16x, it also supports CD burning, and can write and read large format quad, triple and double layer BD-R discs. LG WH16NS40 User Manual • Device drivers • LG Computer hardware. LG Electronics was established in 1958 and has since led the way into the advanced digital era thanks to the technological expertise acquired by manufacturing many home appliances such as radios and TVs.
[General Information]
◆ Model:WH16NS40
◆ Ver:1.01-A0
-. INSTRUCIONS
WH16NS40 Version 1.01-A0 Firmware Update
To update the firmware of the WH16NS40 please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 1.01-A0
The drives must be original LG branded drives with the SMB model number WH14NS40(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC's with Windows 8, 7, Vista and Windows XP
[Critical Instructions] (to be followed carefully)
Lg Wh16ns40 Firmware 1.02
Lg Wh16ns40 Driver
1. Connect the drive at Computer.
2. Download the file WH16NS40_1.01-A0(ew).ZIP to a folder of your choice.
This download includes this 'Read me(ew)' text file, as well as the WH16NS40_1.01-A0.exe
program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the updateprocess,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the WH16NS40_1.01-A0.exe
program and Firmware upgrade will be automatically started.
When the UPGRADE is complete the screen should indicate 'Re Boot' message
and advise you to reboot the system. You will need to reboot your PC
The update will be complete, after you reboot your system.
-. WARNING:
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
Thanks.